Painting sounds like it should be simple job. You just paint the surface and you have this great transformation fit for any budget, right? If the job is done right, yes. If you don’t take the appropriate steps in a painting project, you will find yourself greatly frustrated with bubbling, peeling or even cracking of your newly painted surface. Bill Engler Painting is here to talk about some of the reasons these things happen and what you can do to avoid them.
The Problem Usually Lies on the Surface Being Painted
When it comes to these issues with a painting project, it usually has something to do with the surface that is being painted. You need to take the time to prepare your surface and be sure you are painting in the right conditions. The weather can greatly affect your paint; especially when you are painting outdoors. There are a few conditions that cause your paint to do different things. Here are some of the surface problems:
Bubbling Paint
If you painted your surface in extreme heat or extreme cold, you will most likely experience bubbling. The ideal temperature to paint is within 60-80 degrees. Humidity and moisture also play a role in this problem. You need to avoid painting on days that are too humid so you can ensure the surface is completely dry before you start painting. And last, but not least, you should always clean a surface thoroughly before starting to paint. Watch the weather before starting your project and you should be fine.
Paint Peeling
When paint peels shortly after completely the project, you didn’t prepare the surface well enough that the paint could adhere to the surface properly. That along with humidity play a huge role in peeling. To avoid this problem, you need to sand the surface and make it rough so the paint has a better chance of adhering to the surface.
Cracking Paint
The problem with cracks, is when you find one, it is sure to grow. Small cracks often lead to large flakes of paint coming off the surface painted. The list of reasons for cracking paint is long, because there are so many things that could cause it. You could have not cleaned the surface enough before starting the project, or used a low quality paint. Applying a second coat before the first has had a chance to dry can also cause premature cracking. When you find cracks in your paint, the best option is to sand down the surface and repaint over it. If the crack is severe enough, you may have to completely remove the paint with the use of a stripper and reapply.
Interior & Exterior Painting, Deck Staining & More in Shillington, Muhlenberg, Wyomissing, Sinking Spring, Exeter, Wernersville & Greater Reading, Pennsylvania
Painting is a large, time consuming project. Not everyone has the time needed to dedicate themselves to painting. Luckily, the painting experts at Bill Engler Painting are here to lend the help you need. We offer a wide range of painting services including exterior and interior painting. Call us today for more information on our painting services.
